Web offset Machines

Swing Gripper: Sheetfed Offset Printing

DESIGN:The deliberate emphasis on simplicity of operation has resulted in an easily serviceable design which over the years has proven to be reliable and durable.

SWING GRIPPER: Swing Gripper mechanism Ensure dot to dot registration of even thin stocks at all speeds. The operator can do the make ready operation at low speed and the registration will hold good even when the press is running at high speed. Moreover, Swing Gripper also gives extra time for proper registration.SWING GRIPPER Swing Gripper mechanism

SIDE LAY: Machine is equipped with Both Side bearing side lay to get 100% registration. If any sheet is mis-fed even for an inch it reaches the front lay and its proper feeding is ensured.

FEEDER: The unique stream feeding system is employed in machine to ensure safe and accurate feeding.

INKING UNIT:The 20 Rollers inking unit distributes ink evenly for the most demanding Printing works. Oscillating & Rider Rollers are copper coated, controlled by ink screw & due to M.S. Plate leakage of ink is not possible.

MOTORISED DAMPENING SYSTEM: Motorised dampening system provided to get fresh water in duct round the clock. Precision water feeding allow full control of water distribution with the press of a button.

Special Features

Swing model machines

Note: Printing speed depends upon kind, condition and thickness of stock, type of inks used, desired printing quality and other operating conditions.
Illustration/Specification are not binding and are subject to change without notice due to our continous R & D effort for Improvements / Modifications.